CHZSW - EZ-09/EZ-10 EPOXY RESIN

  • MSDS: CHZSW
  • Manufacturer: COMPOSITE POLYMER DESIGN
  • Product Name: EZ-09/EZ-10 EPOXY RESIN
  • National Stock Number: 8040-00F056812
Product Identification

Product ID:EZ-09/EZ-10 EPOXY RESIN
MSDS Date:01/05/1996
FSC:8040
NIIN:00F056812
Status Code:A
MSDS Number: CHZSW

Responsible Party
COMPOSITE POLYMER DESIGN
949 S CONCORD
S ST PAUL, MN 55075
US

Emergency Phone: 800-755-8568

Info Phone: 800-755-8568

Cage: GO735

Contractor
COMPOSITE POLYMER DESIGN
58 S ST PAUL, MN 55075 US

Telephone: 800-755-8568

Cage: GO735

Ingredients

BISPHENOL A DIGLYCIDYL ETHER RESIN, EPOXY RESIN, EPON 820,

CAS: 25068-38-6

RTECS: KD4380000

Fraction By Weight: 80-95%


1,4-BUTANE DIGLYCIDYL ETHER, DIEPOXIDE

CAS: 2425-79-8

RTECS: EJ5100000

Fraction By Weight: 5-20%


24 GM/L MIX

RTECS: 9999999VO

Hazards

LD50 LC50 Mixture:ORAL LD50(RAT): 1410 MG/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: SEVERE
IRRITANT/CONJUNCTIVITIS/CORNEAL DAMAGE. SKIN: REPEATED/PROLONGED
EXPOSURE MAY CAUSE IRRITATION/CORROSION/DERMATITIS. THERMAL BURNS
TO EYES/SKIN. INHALATION: RESPIRATORY IRRITATION. INGEST ION:
IRRITATION TO THE MOUTH & THROAT.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, PAIN, THERMAL BURNS, HEADACHES,
NAUSEA, DIZZINESS, ABDOMINAL DISCOMFORT, DIARRHEA
Medical Cond Aggravated by Exposure:ECZEMA, ALLERGY & OTHER SKIN
CONDITIONS.

First Aid

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T
INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:470F
Extinguishing Media:CO2, DRY CHEMICAL, WATER SPRAY
Fire Fighting Procedures:USE A SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:VAPORS MAY BE EXCEEDINGLY IRRITATING WHEN
INHALED. IF THE MASS OF MIX RESIN & HARDENER IS OF SUFFICIENT SIZE,
THE MATERIAL MAY SELF-IGNITE. (EXOTHERM).

Accidental Release

Spill Release Procedures:CONTAIN W/A SUITABLE DIKE MATERIAL. VENTILATE
AREA. KEEP UNNECESSARY PEOPLE AWAY. ABSORB IN SAWDUST/SAND/OTHER
ABSORBENT. PLACE INTO OPEN-TOPPED CONTAINERS & COVER LOOSELY. STORE
FOR AT LEAST 12 HOURS BEFORE SEALING THE CONTAINER.

Handling

Handling and Storage Precautions:KEEP CONTAINERS CLOSED & AWAY FROM
HEAT, SPARKS, OPEN FLAMES. STORE IN COOL, WELL VENTILATED AREA IN
TIGHTLY CLOSED CONTAINERS. KEEP FROM FREEZING.
Other Precautions:AVOID MOISTURE CONTAMINATION. KEEP CONTAINERS TIGHTLY
CLOSED WHEN NOT IN USE. KEEP OUT OF REACH OF CHILDREN. DON'T STORE
AT TEMPERATURES ABOVE 120F. PROVIDE VENTILATION IN STORAGE AREA.
DON'T USE THIS PRODUCT IN A POORLY VENTILATED AREA.

Exposure Controls

Respiratory Protection:USE AN APPROVED NIOSH/OSHA RESPIRATOR WHEN THIS
PRODUCT IS HEATED/WHERE THERE IS INSUFFICIENT VENTILATION.
Ventilation:EXHAUST TO KEEP AIRBORNE LEVELS BELOW-OSHA RECOMMENDED
EXPOSURE LIMITS. INDOORS: LOCAL EXHAUST/MECHANICAL VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH-PROOF GOGGLES/FACESHIELD
Other Protective Equipment:IMPERVIOUS CLOTHING, BOOTS, APRON/FULL BODY
SUIT
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:>392F
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT YELLOW HONEY-LIKE LIQUID W/A MILD EPOXY ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS/BASES
Stability Condition to Avoid:EXCESSIVE HEAT, MOISTURE CONTAMINATION,
CROSS-CONTAMINATION OF RESIN & HARDENER
Hazardous Decomposition Products:CO, CO2, ALDEHYDES

Disposal

Waste Disposal Methods:INCINERATION/BURIED LANDFILL DISPOSAL SHOULD BE
IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.